 |
|
|
|
|
|
 |
Product Name：
Wood Style Holder |
Part Number：
Please see as below |
JAN：
Please see as below |
|
| |
 |
BI-WOOD/BK |
BI-WOOD/BR |
The wood tone tone holder which harmonized with interior in the car!
This product is a set of the main part of a holder, and two sorts of holder parts which installs iPod and a mobile phone.
The wood tone was made to compensate for interior in the car.
Weight is only 74g.
It will play an active part also as an offering of a travel or a business trip. Since an arm can be slid among about 4〜9.5cm, it can respond to various products.
I also support all the iPod. (1st/2nd iPod shuffle removes) The curved surface type can adjust an angle freely to an installation side. Since the sponge material is used for an arm pad, there is also no fear of
damaging iPod and a cellular phone.
Since an arm will spread to the maximum if the fixed release button on the back side of a main part is pushed by one push release functional loading,
removal can also be performed by one-touch.
The color prepared two kinds, a black type and a brown type.
Please choose according to iPod of a stock, carrying, and liking.
|
 |
|
[How
to use]
1. Widen the fixing arm by pushing the release button on the backside of iPod Holder.
2. I decide an angle and close a bolt of an installation part.
3. Place the device onto the iPod Holder and tighten the fixing arm by hand.
4. When removing the device, unfasten the fixing arm by pushing the release button on the backside of iPod Holder. |
|
 |
| Specifications |
Weight
|
0.16Lbs |
| Size |
Minimum H3.88" x
W2.58" x D1.37"
Maximum H3.88" x W5.29" x D1.37" |
| Installation
parts |
Dashboard parts |
| Include |
・Holder ・Installation parts
・take oil seat is includes
*Withstand load: 1.32Lbs |
| Support |
All iPod(without 1st/2nd iPod shuffle)
Models with the width 40〜95(mm) |
| Corresponding model |
iPod ※ |
iPod mini |
iPod photo |
1st
iPod shuffle |
2nd
iPod shuffle |
1st iPod nano |
2nd iPod nano |
| ◎ |
○ |
○ |
× |
× |
○ |
○ |
※◎ Support all generation of iPod. ○ Support 3rd, 4th, and 5th generation of iPod. △ Support 3rd and 4th generation of iPod. ▲ Support 5th generation and color display of iPod.
| Part Number |
Product Name |
Color |
JAN |
| BI-WOOD/BK |
Wood Style
Holder/BLACK（BI-WOOD/BK） |
Black |
4528888007134 |
| BI-WOOD/BR |
Wood Style Holder/BROWN（BI-WOOD/BR） |
Brown |
4528888007127 |
| Caution |
- In the case of placing on the dashboard of the car, wipe off dirt on the installation surface.
- Keep it away from direct sun and heat.
- Remove the audio player when you part the car at the locations which receive direct sunlight.
(Be careful as dashboard reaches a high temperature.)
- Please be careful to opening a letter time of a package and openings after opening a letter enough.
(Please do not touch it with a hand, a finger.)
- A release button please push the middle.
- The adhesive strength weakens when I tear off an installation part once.
- Please do installation in a flat aspect.
|
|
| |
|
|
|
