 |
|
|
|
|
|
 |
Product Name：
B-AUDIO Mini FM Transmitter for iPod |
Part Number：
Please see as below |
JAN：
Please see as below |
|
 |
The Digital Tuning FM Transmitter that transfers music on iPod to FM
Radio on your car and play there, while charging the power from
cigarette socket.
The FM Transmitter supports the frequency range 76-90 MHz, and the frequency can be adjusted on the digital display on LCD by 0.1MHz.
The memory function, which allows for the selected frequencies to be stored, has achieved great comfort and saves your troubles of tuning each time of usage.
The iPod Auto ON/OFF function is naturally provided, interlocking the iPod operation (power ON --> play --> pause --> power OFF) to the start/stop of the car engine.
And rolled gold pin is adopted to the connection part of car charger and the reliability is now much improved.
2 choices for the color variation: White and Black.
Choose one depending on the iPod color or your taste.
note: The stand in the photograph is another sales.  iPod stand [ B-STAND , BC-STAND ]
【POINT】
- iPod Auto-Play/Auto-Pause functions provided.
- 「About Auto-Functions」
When the car engine starts・・ The Power of iPod turns ON. A few seconds later iPod starts play using the provided Auto-Play function.
- When the car engine stops ・・ iPod gets paused and about 2 minutes later the Power of iPod automatically turns OFF.
* The Auto-Play function does not work if iPod is not tuned ON for a long time.In this case, turn ON the Power manually by pushing Play button of iPod.
- Supports wide range frequencies with Digital LCD.
|
|
How to use
- Connect to Cigarette socket.
- Adjust the receiver frequency of FM radio to that of BI-FMTM, and starts Play on iPod.
Setting "Favorite Station" Preset Buttons
- Press and hold button 3 (also identified as 'M')for 1 second, then the LED light will flash.
- Press buttons 1 or 2(also identified as '+' and '-') to scroll FM radio frequencies up or down,
- Press and hold any one of the three buttons for one second to set that station into memory. Your selection will be confirmed in the display as 1,2 or3.
（Three "favorite station" can be set)
- Press the 1,2 or3 buttons to recall your preset station.
|
 |
| Part Number |
Color |
|
JAN |
| BI-MIFM/BK |
Black |
 |
4528888005413 |
| BI-MIFM/WH |
White |
 |
4528888005420 |
| Specifications |
・Input: DC12V
・Frequency: 76-90MHｚ
・Weight: 0.13Lbs
・Size:
Carcharger：H2.87"x W1.05" x D0.78"
Transmitter：H2.9" x W1.17" x D0.58"
・Cablelength:
iPod Dock connector・・・Transmitter 7.45"
iPod Dock connector・・・Carcharger 24.5" |
| Support |
1st iPod touch, iPod Classic (80GB, 160GB, 120GB), 1st/2nd/3rd iPod nano, 3rd/4th/5th iPod, iPod photo, iPod color display, iPod mini
* 4th iPod nano supports only an audio line out. (It is impossible of charge)
* iPhone 3G： A message is given at the time of connection. It supports only an audio line out. (It is impossible of charge) |
 |
|
|
| Caution |
- Auto ON/OFF function does not work during the replay of motion picture. Also, it does not work on the 3rd generation iPod.
- Depending on the type of car or the specification of Audio system, sound may not be received properly when the FM antenna is located far from the transmitter.
- Update the iPod firmware before use.
- This product outputs music to audio system from iPod connector. iPod is unable to control volume due to the specification of iPod.
- You may experience noise while charging by Alternator due to the structure of your car model.
- In some case, a cigarette lighter jack may not fit into your car.
- Remove this device from your cigarette lighter outlet when you do not use it.
- Fuse is inside of car charger for safety.
- We are not responsible for any damage made by misuse, abuse, or improper installation.
- This product is made according to the safety standard. However, it is your own responsibility to operate with proper care.
- You may hear noises more frequenty when you are near tower.
For iPod nano user, please reset iPod nano, or follow the instructions below in case you are unable to play music with our product.
(You do not need to reset again once you have done so)
- Connect this product and nano,and play music.
- Insert earphone plug to headphone port.
- Once you hear the sound from earphone,disconnect it from nano.
- Press play button again.
|
|
| |
|
|
|
