 |
|
|
|
|
|
 |
Product
Name：
Compact Car Holder(BI-CHOLDER) |
Part
Number：
BI-CHOLDER |
JAN：
4528888007363 |
|
 |
BI-CHOLDER |
|
|
This product is iPod and mobile telephone use super compact car holder.
The holder size becomes compact with H50xW56xD37(mm)(minimum), 24g in weight.
I can fix it by a one push release function well, and the holder width can support
every portable device to be able to regulate it finely. （Supported product width
W38 - 65mm）Putting on a silicon jacket or a leather case and can cope.
Because the cable holder sticks, I can wear an earphone and am very convenient.
In addition, I have you use it without injuring a portable device on hand in
peace because I use sponge material for an arm pad.
It was attached with 2 of a possible curved surface type to be able to possess an air duct type, the curved surface that could possess the fin of the air-conditioner as an installation part.
Because I can change a setting place depending on a feeling and the situation, it is wrong that a use opens to multiplying it by three 2 times,
and there is not it.
Please try a convenient in-vehicle holder by car. |
 |
Features
・iPod can be placed onto the Holder without taking off silicon jacket or leather case.
・The sponge material on the arm pad can protect iPod from scratches.
・The angle and the direction can be freely adjusted against the installation surface.
・Can be used as the stand for other devices such as mobile phones other than iPod.
How to use
1. Widen the fixing arm by pushing the release button on the right side of iPod Holder.
2. Place the device onto the iPod Holder and tighten the fixing arm by hand.
3. When removing the device, unfasten the fixing arm by pushing the release button on the right side of iPod Holder.
About air-conditioning parts
・Cannot use on cars with the louver depth more than 24mm.
・The distance of each horizontal blades must be wider than 6 mm,
and the distance of each vertical blades must be wider than 8 mm.
・Cannot use on cars where the thickness of horizontal blade is more than 3 mm.
・Does not support round louver.
・Install onto the point where the spacer touches dashboard.
・Adjust the spacer to keep the product horizontal.
・Be careful not to break fin with unreasonable force.
|
| Support |
All
iPod(without
1st/2nd iPod
shuffle)
Models with the
width 38〜65(mm) |
| Weight |
0.05Lbs
*Withstand load:
300g |
| Size |
MinimumH1.96" x
W2.19" x
D1.45"
MaximumH1.96" x W3.16" x D1.45" |
| Installation
parts |
Air duct parts,
Dashboard parts
(curvilinear
surface type) |
| Corresponding model |
iPod ※ |
iPod mini |
iPod photo |
1st iPod shuffle |
2nd iPod shuffle |
1st iPod nano |
2nd iPod nano |
| ◎ |
○ |
○ |
× |
× |
○ |
○ |
※◎ Support all generation of iPod. ○ Support 3rd, 4th, and 5th generation of iPod. △ Support 3rd and 4th generation of iPod. ▲ Support 5th generation and color display of iPod.
| Caution |
- A release button please push the middle.
- The adhesive strength weakens when I tear off an installation part once.
- In the case of placing on the dashboard of the car, wipe off dirt on the installation surface.
- Keep it away from direct sun and heat.
- Remove the audio player when you part the car at the locations which receive direct sunlight.(Be careful as dashboard reaches a high temperature.)
- Please be careful to opening a letter time of a package and openings after opening a letter enough. (Please do not touch it with a hand, a finger.)
|
|
| |
|
|
|
